Bell Super Helmet: Reviewed
With “enduro” being a hotter marketing buzzword than “xtreme” was in the 90s, it’s no surprise that most of the major helmet companies are producing something with a bit more coverage than an average XC lid. The Super is Bell’s entry in this category, and with a deep fit and lots of coverage in the back, it’s proven popular with racers and trail riders alike over the past season. I’ve had the chance to use the Super for a while now, and overall I’ve been rather impressed with its performance.
The Super. Cape sadly not included.
My biggest concern with a full coverage helmet is ventilation. I wore a skate style skid lid while trail riding for longer than I care to admit because I liked the level of protection. Since then I have been on a quest to find a helmet that keeps my sweaty head cool while still offering up that increased level of protection should I make an unscheduled dismount. Thankfully I haven’t had the opportunity (or misfortune I suppose in this case) to test how the Super protects in the event of a severe accident, but I have had the chance to see how well it works otherwise.
Looking at the outside, one can’t help but notice all the vents Bell has put into the Super – 25 to be exact. This is good news, as they do an excellent job of moving air through the helmet while riding both up and downhill. During extended road descents, I found myself coming down with symptoms of brain freeze due to the cold air blowing through. No doubt this will come in handy once the weather warms up again.
Lots of vents. This is one of a whole pile of colours offered and lands somewhere in the middle between understated and outlandish.
On the inside, Bell has padded the Super with X-Static anti-microbial padding. There’s a whole bunch of science and silver fibres that go into them, but the long and short of it is that the pads resist that awful funk that inevitably develops over time – and I’ve also found they don’t soak up sweat like a sponge.
An inside look at the Super, and its science-y padding. The grey plastic vents at the front help direct air down into your goggles, keeping them fog-free on the descent.
Fit is another key factor to look for in a helmet: it can have all the best whiz-bang technologies in the world, but if it doesn’t work with your noodle, it’s pointless. I found the Super’s fit to be relatively deep, in that it sits low on my brow and the back of my head. Personally I like the way it fits, but some may find it too deep or low on their face. As with any helmet purchase, you’re best off trying this one on before pulling the trigger.
The familiar dial type adjustment at the back of the super works as expected.
While this winter has been a relatively dry one there have still been days where conditions have been soggy, and I find myself reaching for my goggles. This is another area where the Super shines. The visor is easily adjustable and has enough real estate underneath to comfortably perch a pair of goggles. Just don’t let your friends catch you riding with the visor in the sky-high “joey” position.
There’s enough room under the visor to shelter a horse in a storm.
All that being said, I do have two little nitpicks with the Super. The first relates to the integrated camera mount on top. While I think the concept of an integrated mount is an excellent idea and would love to see more helmets offer such an idea in the future, I was a bit miffed that the only thing I could mount was a GoPro camera.
The mount in question. Dear bike industry, can we develop a universal mounting system sooner rather than later?
I understand that there is no universal mounting system for head-based accessories (at least not yet), but it’s frustrating to have both a POV camera and a head lamp and not be able to use either right out of the box. Of course the hackers of the mountain bike world have sorted out ways to mount other things to said GoPro mount, but it would be great if there was an OEM solution.
Helmet with the mount attached. Shame I don’t own a GoPro.
The only other issue I take with the Super has to do with its rear retention system. The system is adjustable between three different positions to optimize fit, which is an excellent idea in concept and one we see implemented on many helmets. The snaps that accomplish this task are quite small, and with my fists of ham I was afraid of snapping them off while trying to adjust them. This won’t likely be a problem for most people, but be careful while mucking about with it.
All in all though I’ve been quite impressed with the Super. It does a good job of keeping my head cool and sweat-free while providing a higher level of protection than my old trail helmet. There are a few little bugs to deal with, but neither is a deal breaker. If you are looking at doing some serious descending this summer but don’t want to bake in a full-face, I highly suggest giving the Super a look. It weighs in at 390 grams and runs for $125 USD.
It’s nice to hear that protection no longer has to come with the sacrifice of wearing a sauna on your head…
Comments
raelx
10 years, 1 month ago
I designed this solution for mounting a NiteRider light to a GoPro mount plate. Order away… http://www.shapeways.com/model/865615/niterider-light-to- gopro-mount-adapter.html?etId=12408449&utm_source=automated- contact&utm_medium=email&utm_campaign=so-order- placed
Reply
Vik Banerjee
10 years, 1 month ago
RaelX - your mount doesn't work with the Go Pro mount provided with the Super.
Reply
raelx
10 years, 1 month ago
Yeah but it does with the one on the Lazer helmets and if already have a GoPro place stuck to another brand of helmet. Which is guess is back to the point of the article. Even when they put a camera mount on a helmet they can't do it the same way. Lazer has the GoPro snap in mount socket and Bell is skipping that piece and going straight to the finger joint.
Reply
grambo
10 years, 1 month ago
Anyone know who sells Bell in Vancouver? Their website is useless and won't show Canadian dealers. Thanks, looking to try on the Super in a size large (I have a big noggin, usually Giro XL).
cheers
Reply
Bryce
10 years, 1 month ago
I have Giro Feature, wish I had the Bell 🙁
Reply
james
10 years, 1 month ago
my buddy made a light mount which attaches to the integrated camera mount, using a 3D printer, and some design he downloaded of the net. pretty dang cool.
Reply
Matt L.
10 years, 1 month ago
I'd love to be able to do something like that for my GhostHD camera, but sadly I don't have access to a 3D printer.
Reply
Vik Banerjee
10 years, 1 month ago
Nice. Can you post the link to the part or ask your buddy to? I've got a new 3D printer at work and we are playing around with it so I can try building that part. 🙂
Reply
Bradical
10 years, 1 month ago
I have one, be aware of losing a visor bolt…they will go missing if your puuting googles up into the visor area.I guess constant visor repositioning causes this.
Be sure to keep the bolts somewhat snug so that they don't unthread and go missing. Its too late for me
Reply
Morgan Taylor
10 years, 1 month ago
I will echo the comments about sizing. I usually wear a medium helmet and the M Super sits too low on my head. Basically right down to the eyebrows. I tried a S and the circumference was not big enough (which is true to Bell's size chart, as I have a ~57 cm head). I also can't properly wear saggy hipster toques as my head isn't deep enough. So there.
Reply
semaj
10 years, 1 month ago
I've got a 58cm head and normally wear M helmets as well. Currently using a 661 Recon S/M to commute, but it's a bit snug and sits too high. Of course the L/XL Recon is way too big.
I really want to try the M Super now and see if it will sit lower and feel better than my Recon.
Reply
FloRider
10 years, 1 month ago
I picked one up a few weeks ago. My first "enduro" style helmet. I've only have a few rides on it and am pleased with the fit and flow of it. The only drawback I notice is the wind noise. I only notice it when riding on the road to the trail, but there is enough turbulence that it is hard to hear people talking while riding.
Reply
Cr4w
10 years, 1 month ago
I have this exact model of Super. Love it. Giro changed its sizing a few years ago and suddenly they were no longer my brand. The POC and TLD looked nice, same with the Urge. But the Bell fit better and wasn't nearly as expensive. The GoPro mount is a cool addition. Though none of the shops in Vancouver or Squamish stock the white colour. I had to go to Bellingham to get mine.
Reply
wishiwasridin
10 years, 1 month ago
I have a huge noggin and always complain that i cant find a deep helmet… Where … Can… I … Find … One .. Pls
Reply
Chris Petsche
10 years, 1 month ago
I tried on a medium last night and I looked like I was putting a crab pot on my head.
Sizes run big…
Reply
Rob Gretchen
10 years, 1 month ago
It was between a Super and the TLD A1 for me. I have a Bell Full 9 for DH and love it, but the Super fit a bit funny. The TLD A1 is the best fitting helmet I have ever tried.
Reply
Vik Banerjee
10 years, 1 month ago
I've got a Super in Large [414g]. This review accurately reflects my experience. Fits well. Very comfortable and coverage looks good around ears and back of head.
I really like the visor as it's big enough and adjustable enough to be of some use…a lot of "visors" I've had on older MTB helmets were fashion accessories added to a road helmet that did nothing useful.
I usually wear a L/XL helmet and got the L Super…I have the adjustment system at its tightest so I'd say these helmets fit a bit big, but they have a pretty wide range of adjustment
Not a ultra-light helmet, but the weight disappears on my head when I wear it so that isn't a factor for me.
I'd buy another one.
Reply
boomforeal
10 years, 1 month ago
agreed, fit is excellent but sizing is weird: i usually wear a l/xl helmet and i'm comfortably using a medium bell super
Reply
Please log in to leave a comment.